Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5838 visitantes online.
Productos
Información
Destacado
Inicio >> CANON >> GP215 Manual de Servicio
 
 0 artículo(s) en Su carrito 

CANON GP215
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del CANON GP215 Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
3. OPERATIONS AND TIMING

4. Detecting Overheating on the Fixing Heater End
The rear end of the fixing heater is equipped with a sub thermistor (TH2) to check for overheating. This is to prevent overheating and consequent damage to the fixing film which could occur when continuous copying is performed using copy of B4 or smaller in size. (Overheating tends to occur where the drum is not in contact with paper.) When the output of THE2 exceeds 250°C, the machine increases the sheet-to-sheet distance to accelerate heat discharge of the fixing heater, thereby preventing overheating. Copying operation is continued with the increased sheet-to-sheet distance even after the output of TH2 falls below 250°C. If overheating continues after increasing the sheet-to-sheet distance and the temperature exceeds 260°C, the on-going copying operation will be stopped and the power will be turned OFF. (E001 will be registered.)

5. Protection Mechanisms
The machine is equipped with the following protection mechanisms to prevent malfunction of the fixing heater: a. Thermistor (TH1, tH2) 1. The microprocessor on the DC controller monitors the voltage of the thermistor (TH1, TH2); if it detects overheating of the heater or error low temperature, it stops the power to the heater and turns off the power. (E000 through E003 will be registered.) 2. If the error temperature detection circuit finds that the output of TH1 is 250°C or more or that of TH2 is 260°C for 0.2 sec or more, the heater error detection signal (HTNG) will be issued to turn off the relay, stopping the power to the fixing hater and turning off the power. b. Thermal Fuse (FU1) When the temperature around the thermal fuse reaches 226 °C and the condition remains for a specific period of time, the thermal fuse will melt to stop the power to the fixing heater. c. Heater ON Detection Circuit (200V model only) The period of time during which the fixing heater drive signal (HTRD) remains OFF is monitored; if an error is detected, the power is turned OFF. (E004 will be registered.)

3�122

COPYRIGHT © 1996 CANON INC.

CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

Quizás también quiera comprar

$4.99

GP215 CANON
Catálogo de piezas

Únicamente Catálogo de Partes. Está disponible en formato PDF. Muy útil si su equipo se ha averi…
>
Parse Time: 1.503 - Number of Queries: 102 - Query Time: 0.587